Scroll Corners Island(#5058)
87"L x 63"W price [Click To Customize>>]
The highlight of this functional island countertop is the 4 elegantly detailed edges, which continue without interruption through the scroll corners. Framed openings accomodate an under mount prep sink and a large slide-in range. It's made from smooth 16 gauge zinc, has cast scroll corners, and features a natural finish.
| 
Sink Island with Curved Bar(#3801)
60"L x 16"W price [Click To Customize>>]
An amazing island with a raised, curved bar. The bar has our Mont St. Michel edge, and the countertop has our matching smaller Mon Ami edge. The framed opening is for an undermount farm sink. Smooth all welded 16 gauge zinc, natural highlight finish with wax.
|
Jardins De Giverny Edges & Post Caps(#3059)
99"L x 85"W price [Click To Customize>>]
This large elaborate zinc island features our Giverny edge which includes dentil pattern along the middle ridge. It also includes extended corners to cover 4 corner posts on the island cabinet below. The angled area includes a large overhang to make an eating area. The angled corners creating an interesting shape. The framed sink opening accommodates a ceramic undermount sink. Smooth zinc, natural finish with hand rub.
| 
Mont St. Michel Island(#4191)
84"L x 60"W price [Click To Customize>>]
The large expanse of this island transforms the Mont St. Michael edges from focal point to accent. The large size required a flat weld down the full length of the island, which is completely invisible in these photos. Our hand rubbed feathered rub back provides interest on the smooth expanse of zinc. Smooth 16 gauge welded zinc, natural finish with wax.
|
Rounded Corner Sink Opening(#5185)
89"L x 39"W price [Click To Customize>>]
This island features our new sink opening with rounded corners. We created this curvy opening to center on the top edge of a Shaws sink, and echo the curves of the sink. The corners at the rear of the top are an unusual inside notch design that follows the cabinetry below. Smooth all-welded 16 gauge zinc, natural finish.
| 
Extended Curve Ends(#3931)
104"L x 45"W price [Click To Customize>>]
The curved ends on this island give it a French flavor, and the round cutout accommodated a white ceramic drop-in sink. The entire piece is made from smooth zinc, and is naturally-colored and highlighted with a hand rub.
|
Sink Cutout & Moderne Edge(#4650)
82"L x 69"W price [Click To Customize>>]
This wide Island countertop features our Moderne edge. It also has 3 faucet holes and a 3-sided cutout for a sink. The entire countertop is made from smooth zinc, and is naturally-colored and highlighted with a hand rub.
| 
Chambord Island Top(#4726)
44"L x 38"W price [Click To Customize>>]
Our Chambord edge adds a lovely accent to this simple island. This dimensional edge is free of ornamentation and elegant in its simplicity. 16 gauge all welded zinc, natural hand rubbed highlight finish.
|
Reverse Hammered Straight Island(#3941)
104"L x 22"W price [Click To Customize>>]
A delightful textured surface gives this long island a unique quality. The zinc is fully reverse hammered. The rustic texture on our Mont St. Michel edge lends a hand-made sensibility. Reverse hammered zinc, light antique. patina.
| 
Large Format Island W/ Mon Ami Edge(#3798)
88"L x 51"W price [Click To Customize>>]
The extraordinary size of this island is emphasized even more by the low profile edge. Our 2 inch edge provides a sleek, thin edge appearance. Large tops like this one require multiple deck welds, which we make as invisible as possible. Smooth zinc, natural finish with hand rub.
|
Undermount Matte Stainless Sink(#2986)
115"L x 55"W price [Click To Customize>>]
A supremely simple smooth edge design that goes with any decor. The 4-sided framed opening for the sink is set back so that the sink is inside the cabinet below. The sink shown is custom stainless steel matte finish undermount style. The zinc is smooth, natural finish with hand rub.
| 
Mon Ami W/ Sink Framed Opening(#2995)
98"L x 30"W price [Click To Customize>>]
This sink island features our 2 inch tall Mon Ami edge on all sides. The decorative edge transitions to a smooth framed opening around a custom matte stainless steel apron sink. The 33 inch width is the maximum that would fit on a single sheet of zinc. Smooth zinc, natural finish with wax. Matte finish stainless sink.
|
Curved Mont St. Michel Edge(#2963)
91"L x 56"W price [Click To Customize>>]
This splendid island countertop features our Mont St. Michel edge, and a curved eating area. The integral two-compartment sink is also zinc. All welded smooth 16 gauge copper, medium antique patina.
| 
Curved Normandie Island(#2992)
73"L x 62"W price [Click To Customize>>]
This large island top has a convenient curved overhang that provides an eating area. The simple Normandie edge keeps focus on the sublime feathered pattern of the surface. It has a nearly invisible deck weld, too. The entire piece is made from smooth zinc, and is naturally-colored and highlighted with a hand rub.
|
Mon Ami Rounded 1 1/2" Radius Corners(#5007)
71"L x 32"W price [Click To Customize>>]
This small scale kitchen island features our marine Mon Ami edge and 1 1/2" radius rounded corners. The square opening accomodates a cook top. 16 Gauge smooth zinc, natural finish.
| 
Bistro Island(#4241)
128"L x 56"W price [Click To Customize>>]
This large seamless welded island top with Bistro edge required a weld that ran the entire length of the top. Our Bistro edge puts a fine finish on the edges. Smooth 16 gauge welded zinc, natural finish with hand rub.
|
Reverse Hammered W/ Sink Framed Opening(#2736)
82"L x 61"W price [Click To Customize>>]
This large island accommodates an undermount sink with a framed sink opening. It includes invisible deck welds because the large size requires multiple sheets of zinc. The large area of hammering becomes a focal point in and of itself. Reverse hammered finish, light patina.
| 
Round Island Mon Ami(#4788)
36"L x 36"W price [Click To Customize>>]
This round island top features seamless construction. The curved perimeter requires us to weld the edge onto the deck with an invisible weld. We built this top with 1 layer of substrate and solid fill edges to allow installation over an existing round table top. 16 gauge all welded zinc, natural finish.
|
Large Seamless Island(#4441)
85"L x 64"W price [Click To Customize>>]
This exquisite large island has a framed opening for an undermount sink. We asked for the sink so we could get the dimensions and coves exactly right. There is a barely visible deck weld across this deck since the size requires more than one sheet of zinc metal. The finish is natural with a hand rub.
| 
Simple Island Top(#5172)
75"L x 55"W price [Click To Customize>>]
This 75" x 55" zinc island required 2 sheets of zinc which we joined with an invisible deck weld. The simple edges and basic rectangle shape form a smooth slab. All welded smooth 16 gauge zinc, natural hand highlighted finish, 2 layers of cabinet grade plywood substrate.
|
Waterfall Zinc Island(#2942)
72"L x 34"W price [Click To Customize>>]
A seamless waterfall end panel gives this zinc island top an unmistakeable modern flair. We provided a rectangular framed opening for the stainless sink. This island top mounted over an existing cabinet, so there was no need for cladding on the back side of the waterfall. Cladding can be added in cases when the back side is exposed. This price does not include the stainless sink. All-welded 16 gauge zinc, natural finish.
| 
Grand Scale Island(#3800)
110"L x 55"W price [Click To Customize>>]
This extra large 7 ft x 14 ft island becomes the focal point just from its size. The epic scale of this zinc island top is nicely accented by our Mont Saint Michel edges on on all sides. The sink is our custom matte finish stainless steel undermount farmhouse with a framed zinc insert in the apron and stainless steel towel bar. The countertop is smooth zinc, natural finish with hand rub.
|
5-Sided Bullnose Island(#3914)
81"L x 52"W price [Click To Customize>>]
This island fit into a kitchen with an angled corner. The 5-sided shape allowed a consistent walkway width between this top and the adjacent counter tops along the wall. Simple bullnose edges keeps this top a low key design element. The 48 inch width dimension required a long weld down the length of the countertop. Smooth zinc, natural finish with hand rub.
| 
Hammered Custom Zinc Island Top(#4499)
106"L x 40"W price [Click To Customize>>]
This custom zinc island top was built with 16 gauge all-welded zinc. The top was sized to fit on a single sheet of zinc, which avoided deck welds and reduced the price. The edges turn down and then under, and all corners are welded and polished. Our sublime reverse hammered texture increases durability and reduces scratches. Our natural finish acquires a fine medium gray color over time.
|
Rounded Corner Island(#4274)
69"L x 22"W price [Click To Customize>>]
We rounded all 4 corners of this simple island. The rounded corners offer a softer presence than square corners. These photos show how zinc changes appearance depending on light direction. The photos that show a feathery texture were illuminated with direct light from behind, while the photos with the more solid, matte look had diffuse light from behind, and direct light from the front. Smooth 16 gauge welded zinc, natural finish with hand rub.
| 
Simple Island Framed Sink Opening(#4267)
98"L x 34"W price [Click To Customize>>]
Flat edges and a 4-sided framed sink opening keep this zinc island's shape and features simple. The edges are 1 5/8" height, and the framed opening is 1 1/2" height. Smooth 16 gauge welded zinc, natural finish with hand rub.
|
Round End With Integral Sink & Mon Ami Edge(#4857)
91"L x 70"W price [Click To Customize>>]
This custom zinc countertop features a rounded end, and has our "Mon Ami" edge. It also has an integral zinc sink, and has three faucet holes. It's completely smooth, and has a natural hand-rubbed finish.
|
