Distressed Steel Trapezoid
The combination of smooth steel straps over distressed steel panels makes this a striking hood. Angular lines, diamond clavos at the corner junctions, and round rivets on the straps creates variety and interest from every angle. 16 gauge distressed steel, French Gray patina.
48"L x 48"H Stack: 12"H Wall Mount $13658[Customize It]
|
Steel Body W/ Steel Straps & Zinc Clavos
This steel Pyramid hood includes two horizontal straps on the bottom band. The straps are made from blackened steel and have zinc clavos fasteners. The body is made entirely from steel and finished with our French Grey finish.
48"L x 30"H Stack: 10"H Wall Mount $9689[Customize It]
|
Steel Body W/ Distressed Texture & French Grey Finish
This steel Pyramid hood features four horizontal standing seams, evenly spaced vertically long the hood. The body of the hood has a Distressed texture to give it a more rustic look. The entire hood is made from steel and has our French Grey finish.
49"L x 49"H Wall Mount $11189 [Customize It]
|
Seamed Steel Pyramid, Smooth
This Pyramid hood includes four horizontal standing seams on the body. The entire hood is finished with our French Gray patina. It is made from solid steel.
45"L x 45"H Wall Mount $9445 [Customize It]
|
Classic Smooth Pyramid
The sleek design of this hood includes an integral bottom band and a smooth body. The zinc is fully welded and polished, and the medium antique finish gives it an aged look.
55"L x 30"H Wall Mount $6566 [Customize It]
|
Mantle Base W/ Medium Patina
This long pyramid hood features an elaborate mantle base for a bottom band. It's made entirely from smooth zinc and finished with our Medium antique patina.
72"L x 45"H Wall Mount $13824 [Customize It]
|
Wide Stack With Moldings
This large Pyramid hood includes an extra tall stack, designed to reach a vaulted ceiling. The stack has a peak top with a beam notch to accommodate ceiling joists. The four moldings on the stack provide visual reference points and allow us to segment the stack in order to reduce the cost. The entire hood is Zinc with a light antique patina.
66"L x 30"H Stack: 116"H Wall Mount $20317[Customize It]
|
Steel Body W/ Butterfly Strap On Bottom Band
This low profile Island hood includes an extra tall stack with a slanted top. The hood itself has a decorative Stainless strap with butterfly finish on the bottom band. Our structural stacks for islands are fully welded and polished, and they include a welded mounting flange at the top for easy installation. The entire hood and stack are made from smooth 16 gauge steel and have our French Grey finish.
48"L x 7"H Stack: 61"H Island Mount $12088[Customize It]
|
Modern Tall Pyramid
This Pyramid hood has its lower band removed to give it a more geometric design. The entire hood is made from smooth zinc and finished with our Medium antique patina.
42"L x 33"H Wall Mount $5562 [Customize It]
|
Smooth Hood W/ Medium Patina & Front Pot Rail
This zinc Pyramid hood features a stack and a stainless pot rail on the front of the lower band. The body is made entirely from smooth zinc and finished with our Medium antique patina.
60"L x 25"H Stack: 22"H Wall Mount $9068[Customize It]
|
Wide Pyramid
This Pyramid hood was almost five feet long, to accommodate an extra large range. The hood is finished with a Medium Antique patina. The entire piece is made from solid zinc.
58"L x 30"H Wall Mount $7194 [Customize It]
|
Slab Base Pyramid
This Pyramid style hood includes a wide stepped band that runs across the hood and wraps around the sides. This bottom band requires a rigid internal structure for stiffness. The entire hood is made from Zinc and shown in a Medium Antique patina.
66"L x 30"H Wall Mount $10449 [Customize It]
|
Distressed Pyramid W/ Tall Stack & Straps
This fine hood features an extra tall stack designed to reach an angled and vaulted ceiling. The stack is fully welded and polished with a matching distress and French Grey finish. The bottom band of the hood has two horizontal steel straps attached to the hood with zinc pyramid clavos. The distressed texture and antique give the piece an aged look.
54"L x 30"H Stack: 102"H Wall Mount $16356[Customize It]
|
Tall Industrial Trapezoid
Enter Description Here
48"L x 72"H Wall Mount $12912 [Customize It]
|
Tall Body With Hammered Base
This custom zinc hood features a tall body to help reach a high ceiling, and has a hammered bottom area. The bottom is fully textured with our "Reverse Hammering" technique, and is seamlessly welded into the smooth main body. It's made from the purest zinc available, and has our "Medium Antique Patina" finish.
40"L x 72"H Wall Mount $9572 [Customize It]
| 
Zinc and Steel Pyramid Range Hoods #5151
Tall Industrial Flanged
The tall trapezoid shape is broken into 4 nicely proportioned sections by welded standing seams, forming a second level of trapezoid shapes that echo the overall shape. The result is an unexpectedly powerful geometric form. All welded 16 gauge zinc, medium patina.
46"L x 64"H Wall Mount $13709 [Customize It]
|
Zinc and Steel Pyramid Range Hoods #4240
Classic Pyramid Island With Straps & Stack
This classic Pyramid hood includes a square stack at top and two straps on the bottom band. The straps are made from solid zinc and are antiqued to match the hood. The hood and stack are shown in our Medium Antique patina.
48"L x 16"H Stack: 6"H Island Mount $8867[Customize It]
|