Double Drainboard Kitchen Center
A large sink and 2 large drainboards provide lots of work surface on this ultra practical kitchen center. Ribbed drain boards slope into the sink for easy draining. There are holes in the back deck for a faucet and custom outlet cutouts in the backsplash. The entire sink is made from 14 gauge stainless and has a Micrograin finish.
70"L x 18"W $7550 [Customize It]
|
Custom Stainless Kitchen Center with Drain Board, Backsplash, and Woven Stainless Apron
This fabulous sink combines many of our best features! This sink extends all the way to the wall, and normally butts to counter tops at each end. The sink is 14 gauge stainless, and both the sink and woven stainless apron insert have our micrograin finish.
56"L x 25"W $8795 [Customize It]
|
Low Profile Drain Board
This ultra-low profile drainboard is perfect for installation in the tight space above a dishwasher. The 2-compartment sink features extra-deep bowls and a dropped divider. All-radiused cove corners make cleaning easy. All-welded 14 gauge stainless steel, micrograin finish.
49"L x 18"W $4402 [Customize It]
|
Farmhouse Apron & Integral Drainboard
Our integral drainboard is attached to this classic farmhouse sink. Hand-made ribs on the drainboard allow dishes to drain and dry easily. The square-style apron is designed to match the overhang of the counter top. The entire sink has our Micrograin finish on 14 gauge stainless.
54"L x 21"W $5186 [Customize It]
|
2 Drainboards On Long Sink
The long bowl and 2 drainboards add up to an extra large sink. Drainboards are sloped to drain into the sink, and hand-made ribs raise the dishes for easy drying. It has our Micrograin finish on 14 gauge stainless.
73"L x 20"W $6806 [Customize It]
|
Undermount Sink With Drainboard
Our long, hand-made ribbed drainboard is attached to this lovely single sink. Install this sink under any counter top. It has our Micrograin finish on 14 gauge stainless
50"L x 20"W $3196 [Customize It]
|
Flush Mount W/ Splash,Drainboard, & Cuttingboard Track
This sink can stand alone or fit between 2 sections of countertop. The front edge has a marine-edge that keeps water from dripping. Faucet holes are on the splash and other holes are on the deck behind the bowl. The hand-made drainboard is sloped to drain into the sink, and has raised hand-made ribs so dishes dry easily. The deck is customized with a cutting board track so your cutting board can slide left to right over the sink & drainboard. The whole piece has our Micrograin finish on 14 gauge stainless
44"L x 18"W $6674 [Customize It]
|
Double Flush Mount,Splash & Drainboard
Designed to stand alone or set next to 2 pieces of stone counter top, this sink has an eased front edge. The handmade drainboard is sloped to drain into the sink and has raised ribs so dishes dry easily. A single faucet hole is on the back deck. The larger sink is also bigger front-to-back. It has our Micrograin finish on 14 gauge stainless.
67"L x 25"W $6699 [Customize It]
|
Ribbed Drainboard On Drop-In
Our hand-made ribbed drainboard drains directly into the sink. It is long enough to use as a dish drying area. Faucet holes are on the back deck, and the whole piece drops-in on top of the counter top. It has our Micrograin finish on 14 gauge stainless.
58"L x 22"W $5031 [Customize It]
|
Undermount Double With Drainboard
The integral drainboard is sloped to drain directly into one of the large sinks. Hand-made ribs on the drainboard allow wet dishes to drain and dry easily. The bowls were made extra deep to accommodate a large pot. The piece has our Micrograin finish on 14 gauge stainless.
57"L x 20"W $4214 [Customize It]
|
Large Corners & Drainboard
This custom stainless sink features a neat drainboard perfectly sized for a small kitchen. The interior corners are coved for easy cleaning, and the entire sink is fully welded and polished. It's made from 14 gauge stainless steel, and has our stainless grain finish.
23"L x 21"W $3861 [Customize It]
|