This 2-station zinc lavatory top features an integral 57" long sink with smooth finish welded seamlessly into in the reverse hammered deck. The sink slopes to the rear center drain. All welded 16 gauge zinc, natural finish.
102"L x 24"W $7711 [Customize It]
Alcove Bar Top
This very simple zinc alcove top features an integral zinc bar sink. Both the countertop and bar sink are smooth zinc. The front endge is our 1 5/8" Normandie channel edge, and the ends and back edge are raw. All welded 16 gauge smooth zinc, natural finish.
53"L x 24"W $3365 [Customize It]
Economy Channel Edge
This top is ready to install. It comes bonded to 2 layers of 3/4" plywood substrate. Just drop in place, run screws, you're done! The zinc is thick, all-welded 16 gauge seamless construction with our natural highlight zinc finish and carnauba wax coating.
92"L x 35"W $4299 [Customize It]
Claire Edge with Post Caps
Our quarter roll Claire edge give this countertop a turn-of-the-century appeal. We followed the line of the cabinet, including post caps at the sink. The 3-sided framed opening is perfectly sized to fit the undermount sink by means of a template. Smooth, all welded 16 gauge zinc, natural finish.
165"L x 31"W $11448 [Customize It]
148" Ogee Edge
This countertop features our ogee edge, post caps, and extended front. A 4-sided custom framed opening accomodates an undermount sink. Notches at both ends of the backsplash and an angle cut at the left end fit existing features of the room. Smooth all-welded 16 gauge zinc, natural finish.
148"L x 26"W $13425 [Customize It]
Mon Ami Lav Top
This graceful lav top features an oval framed opening and a 1" splash. We templated the shape of the oval sink and matched it precisely. It's made from smooth 16 gauge welded zinc, and has a Natural finish with wax.
48"L x 21"W $2161 [Customize It]
Extended Front & Reverse Hammered
Reverse hammered texture gives this countertop a rustic appeal. The square cornered extended front covers corner posts on the cabinet front below. Reverse Hammered zinc, light patina.
82"L x 25"W $3208 [Customize It]
Rustic Extended Front
Every surface of this countertop, sink, and drainboard is reverse hammered for a strongly rustic style. The left and front edges are raised for water control. The backsplash is coved at the deck for eady cleaning. The extra large sink with right hand drainboard provides ample working space for large items and a convenient place to drain. Reverse hammered zinc, medium antique patina.
102"L x 25"W $9248 [Customize It]
Extended Front Integral Sink
A simple extended front and integral sink take this counter top to the basics. The square-cornered extended front covers a jog in the cabinet below. It's made from smooth 16 gauge zinc and has a Natural finish with hand rub.
85"L x 30"W $3805 [Customize It]
Mes Ami Wet Bar Top W/ Framed Opening
This is a delightful bar prep countertop with dentil pattern detail on the bottom of our 2 1/4" Mes Ami Edge. The round framed allows use of an undermount bar sink. Short splashes protect the walls. The entire piece is made from smooth zinc, and has a natural hand rubbed finish.
49"L x 27"W $4804 [Customize It]
Mont Marte Edge
This curvy edge is a showpiece of craftsmanship. The raw back and ends were covered with a stone splash, so the side walls extended past the front edge, making this top slightly recessed. It's made from smooth zinc and has a Natural finish with hand rub.
62"L x 18"W $1233 [Customize It]
Marine Bistro Island Bartop
This piece has a raised marine edge, which combines with our classic Bistro edge to give this island bar top a solid, elegant presence. The marine edge controls spills, but also provides visual interest. It's made from smooth 16 gauge zinc, and has a Natural finish with hand rub.
103"L x 21"W $8706 [Customize It]
Rectangular Bistro Island
This rectangular island top fits into a narrow space. Our integral cove trim under the curved Bistro edge makes an elegant transition to the cabinet below. The entire piece is made from smooth zinc, and has a Natural finish with hand rub.
72"L x 28"W $6399 [Customize It]
Embossed Edge Shelf W/ Braid Edge
Rich edge detail graces the front of this purse shelf. The quarter roll top edge of this countertop softens the look. This photo shows a very small top, only 26L x 18W. The edge height is 2 1/2 inches. Embossed edge patterns are available in hundreds of other patterns. Smooth zinc, light antique patina shown darkened after aging.
26"L x 18"W $3459 [Customize It]
Window and Sink Frame
This extraordinary residential countertop is 21 feet long, and features a notched backsplash which accommodates a wide window that extends down right to the deck level. The sink is centered on the window. The entire piece is made from smooth zinc, and has a Natural finish with wax rub.
252"L x 26"W $10165 [Customize It]
Zinc Countertop #4188
Mont St. Michel Extended Alcove
This counter top extends beyond the end walls of a long alcove. We accommodated the end walls with notches at each end. We also extended the length 1" on each end so that the Mont Saint Michel edge could continue around the front corners and terminate against the front of the alcove walls. It's made from smooth 16 gauge zinc, and has a Natural finish with hand rub.
156"L x 22"W $6359 [Customize It]
Zinc Countertop #4189
Marine Front Edge & Drink Rail
This top is a small commercial bar top with a drink rail at the rear. The marine edge keeps spills contained. The drink rail is fully welded and liquid-tight. Smooth welded 16 gauge zinc, natural finish with hand rub.
118"L x 28"W $4137 [Customize It]
Zinc Countertop #3940
Italian Marine Edge
The substantial Italian marine edge on this top adds a good deal of mass. All sides are raised with a marine edge for outstanding water control. The rise at the rear keeps water out of the seam where the counter top meets the wall. It's made from smooth zinc, and has a Natural finish with hand rub.
71"L x 26"W $3442 [Customize It]
Zinc Countertop #4190
Extended Front W/ Framed Sink Opening
The extended front of this counter top is especially prominent, jutting out 5". We templated the undermount sink to capture the shape for the 4-sided framed opening. The entire piece is made from smooth 16 gauge welded zinc, and has a Natural finish with wax.
99"L x 31"W $4607 [Customize It]
Zinc Countertop #3854
Waterfall Level Change
This counter top has a waterfall-style level change to another section of zinc counter top, which continues on to the right at the lower level. Both the counter top and the waterfall have substrate for support. In this installation, both sides of the waterfall are visible, so we added cladding on the back side. Seamless smooth 16 gauge zinc, natural highlight finish.
58"L x 26"W $5738 [Customize It]
Zinc Countertop #3857
Short Backsplash & Mont St. Michel Edge
This partial alcove countertop has splashes at the 3 adjoining walls. The substantial Mont St. Michele edge provides mass to this small countertop. Smooth zinc, natural finish with hand rub.
53"L x 26"W $3228 [Customize It]
Zinc Countertop #3936
Stove End Countertop
This countertop was installed adjacent to a range. It includes an opening in the backsplash to accommodate a deck-level window. Smooth zinc, natural finish with hand rub.
45"L x 25"W $2630 [Customize It]
Zinc Countertop #2859
Alcove Prep Bar W/ Mont St. Michel Edge
This is an elegant top with a framed opening for an undermount bar sink. The decorative front edge provides interest. The entire piece is made from smooth zinc, and has a Natural finish with hand rub.
86"L x 26"W $4721 [Customize It]
Zinc Countertop #4757
Our 2/12" Felice edge is the perfect scale for this small alcove top. The integral sink is welded seamlessly into the deck. 16 Gauge zinc, natural finish.
67"L x 26"W $3972 [Customize It]
Zinc Countertop #5280
Straight Top With Integral Sink & Bistro Edge
This beautiful zinc countertop features our Bistro edge, which has a gap on the front to accommodate the shape of the customer's cabinets. It also has a backsplash that extends around from the front-left edge to the far right of the rear edge, and an integral zinc sink with 6 faucet holes. The entire countertop is completely smooth, and has a natural hand-rubbed finish.
115"L x 25"W $7007 [Customize It]
Zinc Countertop #3371
Stand Up Eating Bar
We made 4 of these tops for a deli that wanted to add zinc eating bars at standing height around the perimeter of the dining area to increase serving capacity. They mounted these bars at 42 inches and equipped them with tall stools. The tall splash provides an easy-clean back surface that joins the deck with a sanitary seamless 3/4 inch cove radius. Smooth zinc, natural finish with hand rub.
90"L x 14"W $2425 [Customize It]
Zinc Countertop #4883
Marine Bistro Edge & Integral Sink
This custom zinc countertop has a raised bar area and an integral sink. It also has our marine-style "Bistro" edge, which helps contain liquids. It's made entirely from smooth zinc, and has a natural hand-rubbed finish.
60"L x 18"W $6367 [Customize It]
Zinc Countertop #5120
Backsplash With Claire Edge & Circular Cutout
This custom zinc countertop features our "Claire" edge, and has a backsplash. It also has a circular sink cutout, and has a faucet hole. It's completely smooth, and has a natural hand-rubbed finish.
30"L x 26"W $3674 [Customize It]
Zinc Countertop #2735
Angled Peninsula W/ Framed Opening For Sink
An unusual sink shape required this custom framed opening. The left end is a wide passthrough which is open on front and back. The front edge also angles back from the sink to the left end. We custom built the curvy sink opening for a large ceramic sink. Smooth zinc, natural zinc with wax.
187"L x 39"W $12673 [Customize It]
Zinc Countertop #2945
Very Long W/ Normandie Edges
A simple single piece counter top with Normandie edges and small splash that provides a water stop under a tile wall. The entire piece is made from smooth zinc and has a Natural finish. The finish produces a feathery highlight that is visible in direct lighting. Two layers of cabinet grade plywood are glued to the bottom of the zinc for stability and easy installation.
152"L x 19"W $4311 [Customize It]